|
|
(64 intermediate revisions by 2 users not shown) |
Line 1: |
Line 1: |
| [[How to make your own SD-bootable ROM|English]] | | [[How to make your own SD-bootable ROM|English]] |
| | | |
− | ==制作RK3399平台的系统映像== | + | ==制作量产用的文件系统 (以s5p4418为例)== |
− | 请参考这个git仓库: https://github.com/friendlyarm/sd-fuse_rk3399
| + | ===烧写系统到emmc,按你的项目要求定制系统=== |
| + | * 用 s5p4418-eflasher-friendlycore-xxx.img 的固件 制做一张 tf 卡<br /> |
| + | * 用 tf 卡启动,进入烧写预览界面,选中 Disable overlay filesystem, 然后正常烧写系统到 emmc,如果没有看到 Disable overlay filesystem 选项,说明你的固件不是新版本,先去下载新固件:dl.friendlyelec.com <br /> |
| + | * 拨出 tf 卡,用 emmc 启动到 friendlycore<br /> |
| + | * 用 mount 命令查看根目录,确定根目录的挂载类型不是 overlay<br /> |
| + | * 正常安装你想要的软件,配置系统<br /> |
| | | |
− | ==制作S5P4418平台的系统映像== | + | ===从emmc中把文件系统备份出来=== |
− | 请参考这个git仓库: https://github.com/friendlyarm/sd-fuse_s5p4418
| + | * 准备一个 u盘,格式化分区为 ext4 格式<br /> |
− | | + | * 再次用 tf 卡启动系统,并拨入u盘<br /> |
− | ==制作S5P6818平台的系统映像==
| + | * 用电脑上用 ssh 登录: ssh root@192.168.1.231,密码是 fa<br /> |
− | 请参考这个git仓库: https://github.com/friendlyarm/sd-fuse_s5p6818
| + | * 用以下命令挂载 emmc 的 rootfs 分区到 /mnt/rootfs目录: |
− | | + | |
− | ==制作H3 平台的系统映像==
| + | |
− | 如果你定制了U-boot、Linux内核、文件系统,并且想基于自己定制的文件制作Linux系统映像文件 (以下简称为ROM文件),可以使用FriendlyElec提供的[https://pan.baidu.com/s/1DSd4XYXr1yGyQTdRNQNoOw rom-maker-lite]工具。<br>
| + | |
− | rom-maker-lite是一套通用的制作映像文件的脚本工具,目前支持为 H3/H5 系列的开发板制作Linux平台的sd/eflasher ROM文件(尚未支持Android),解压后执行./mkimage.sh可以查看帮助信息:
| + | |
| <syntaxhighlight lang="bash"> | | <syntaxhighlight lang="bash"> |
− | $ ./mkimage.sh
| + | mkdir /mnt/rootfs |
− | Usage:
| + | mount /dev/mmcblk1p2 /mnt/rootfs |
− | $ apt-get install tree exfat-utils dosfstools python3-tk
| + | |
− | $ ./mkimage.sh -c <filesystem type> -m <partmap> -d "<misc dir>;<partition1 dir>;<partition2 dir>;..."
| + | |
− | -c <filesystem type>:
| + | |
− | 1: misc(bootloader) + fat32 boot.img + ext4 rootfs.img
| + | |
− | 2: misc(bootloader) + fat32 boot.img + ext4 rootfs.img + exfat friendlyarm.img
| + | |
− | 3: misc(bootloader) + ext4 boot.img + ext4 rootfs.img
| + | |
| </syntaxhighlight> | | </syntaxhighlight> |
− | | + | * 挂载 u盘下到 /mnt/udisk (如何没有挂载), 然后创建 /mnt/udisk/rootfs 目录 |
− | ::{| class="wikitable"
| + | |
− | |-
| + | |
− | |参数||说明
| + | |
− | |-
| + | |
− | | -c <filesystem type> ||
| + | |
− | -c 用于指定ROM文件内各分区的文件系统格式,对于H3/H5系列的开发板:<br>
| + | |
− | -c 1适用于FriendlyCore/Ubuntu/Debian/OpenWrt等sd ROM; <br>
| + | |
− | -c 2适用于eflasher ROM。
| + | |
− | |-
| + | |
− | | -m <partmap> || 用于指定制作ROM时需要的partmap文件,partmap文件用于指定ROM Image的布局方式和组成文件,不同的板子或者是同一板子不同版本的BSP使用的partmap文件是不一样的。
| + | |
− | |-
| + | |
− | | -d "<misc dir>;<partition1 dir>;<partition2 dir>;..." ||
| + | |
− | -d 用于指定系统文件所在的目录,每个路径之间用“;”分割,对于H3/H5系列的开发板:<br>
| + | |
− | <misc dir>: 用于指定bootloader所在的目录路径;<br>
| + | |
− | <partition1 dir>: 用于指定boot分区的目录路径;<br>
| + | |
− | <partition2 dir>: 用于指定rootfs分区的目录路径;<br>
| + | |
− | 最后的...表示就还可以接收更多的目录路径。当制作eflasher ROM时,就需要添加friendlyarm分区的目录路径;
| + | |
− | |-
| + | |
− | |}
| + | |
− | | + | |
− | * <b>准备工作</b>
| + | |
− | 经测试过PC机 Ubuntu版本包括:<br>
| + | |
− | 1) ubuntu-16.04.5-desktop-amd64.iso <br>
| + | |
− | 2) ubuntu-18.04.1-desktop-amd64.iso <br>
| + | |
− | 如果你当前PC机使用的Ubuntu系统无法成功执行出系统映像,请尝试切换到上面这两个版本的Ubuntu系统。<br>
| + | |
− | | + | |
− | 在开始制作系统映像前,必须先安装下列软件包:
| + | |
| <syntaxhighlight lang="bash"> | | <syntaxhighlight lang="bash"> |
− | $ apt-get install tree exfat-utils dosfstools python3-tk
| + | mount /dev/sdb1 /mnt/udisk |
| + | mkdir /mnt/udisk/rootfs |
| </syntaxhighlight> | | </syntaxhighlight> |
− | | + | 注:有时 u盘的设备名是 /dev/sda1已经自动挂载到 /mnt/udisk 目录<br /> |
− | 由于制作系统映像需要root权限,请先切换到root用户:
| + | <br /> |
| + | * 安装 rsync 工具 |
| <syntaxhighlight lang="bash"> | | <syntaxhighlight lang="bash"> |
− | $ su root
| + | wget http://112.124.9.243/cn-apt-source.sh |
| + | chmod 755 cn-apt-source.sh |
| + | ./cn-apt-source.sh |
| + | apt-get update |
| + | apt-get -y install rsync |
| </syntaxhighlight> | | </syntaxhighlight> |
− | | + | * 将 emmc 的 rootfs 分区文件拷贝到 u盘,忽略掉特殊文件: |
− | | + | |
− | * <b>为H3 系列的板子制作基于Uboot-2017 + Linux-4.14 的sd ROM(例如FriendlyCore/Debian/OpenWrt...)</b> | + | |
− | 事实上,对于Uboot-2017 + Linux-4.14版本的BSP,所有H3 系列的板子的sd ROM文件都是同一个。所以对于这个版本的BSP,所有H3 系列的板子的sd ROM 的制作命令是一样的。
| + | |
− | 这里以制作FriendlyCore sd ROM为例进行讲解,Debian、OpenWrt等sd ROM文件的制作方法是类似的。<br><br>
| + | |
− | 假设你已经有一张带有FriendlyCore系统的SD卡,并且该SD卡的rootfs目录下已经包含了你自己的应用程序和设置。请将该SD卡插入PC机中,然后挂载SD卡的rootfs分区(假设挂载路径为rom-maker-lite/part2/h3/4.14/friendlycore/rootfs/, 请注意使用真实路径),使用下面的命令可以生成你自己定制的ROM文件:
| + | |
| <syntaxhighlight lang="bash"> | | <syntaxhighlight lang="bash"> |
− | $ ./mkimage.sh -c 1 -m partmap/h3_linux-4.14/partmap.txt -d "misc/uboot-2017_h3/;part1/boot_linux-4.14_h3/;part2/h3/4.14/friendlycore/rootfs/"
| + | rsync -aAXv --exclude={"/dev/*","/proc/*","/sys/*","/tmp/*","/run/*","/mnt/*","/media/*","/lost+found","/swapfile"} /mnt/rootfs/* /mnt/udisk/rootfs |
| </syntaxhighlight> | | </syntaxhighlight> |
− | 如果有需要,可以将misc/uboot-2017_h3、part1/boot_linux-4.14_h3目录下的文件替换为你自己的定制文件,当然你也可以使用目录里自带的预编译系统文件,我们会不定期更新预编译系统文件,通过tree命令可查看有哪些可替换的系统文件:
| |
− | <syntaxhighlight lang="bash">
| |
− | $ tree misc/uboot-2017_h3/ part1/boot_linux-4.14_h3/
| |
− | misc/uboot-2017_h3/
| |
− | └── u-boot-sunxi-with-spl.bin
| |
− | part1/boot_linux-4.14_h3/
| |
− | ├── boot.cmd
| |
− | ├── boot.scr
| |
− | ├── rootfs.cpio.gz
| |
− | ├── sun8i-h2-plus-nanopi-duo.dtb
| |
− | ├── sun8i-h3-nanopi-duo2.dtb
| |
− | ├── sun8i-h3-nanopi-m1.dtb
| |
− | ├── sun8i-h3-nanopi-m1-plus.dtb
| |
− | ├── sun8i-h3-nanopi-neo-air.dtb
| |
− | ├── sun8i-h3-nanopi-neo-core.dtb
| |
− | ├── sun8i-h3-nanopi-neo.dtb
| |
− | └── zImage
| |
− | </syntaxhighlight>
| |
− | 对于所有使用Linux-4.14 BSP的H3板子,使用的都是同一个partmap文件partmap/h3_linux-4.14/partmap.txt。<br>
| |
− | mkimage.sh执行成功后,会生成一个out/SD-bootable-1目录,其内容如下:
| |
− | <syntaxhighlight lang="bash">
| |
− | $ tree out/
| |
− | out/
| |
− | ├── SD-bootable-1
| |
− | │ └── your_company
| |
− | │ ├── boot.img
| |
− | │ ├── info.conf
| |
− | │ ├── partmap.txt
| |
− | │ ├── rootfs.img
| |
− | │ └── u-boot-sunxi-with-spl.bin
| |
− | ├── SD-bootable-1.img
| |
| | | |
− | </syntaxhighlight> | + | ===用备份出来的文件系统,重新制作用于量产的固件=== |
− | part1/boot_linux-4.14_h3/目录被制作成了boot.img,part2/h3/4.14/friendlycore/rootfs/被制作成了rootfs.img,SD-bootable-1.img则为最终的sd ROM文件,你可以用win32diskimager或者dd命令将SD-bootable-1.img烧写到SD卡中。
| + | * 将 u盘拷到ubuntu电脑上,挂载u盘到 /media/udisk<br /> |
− | <!--
| + | * 用 sd-fuse_s5p4418 重新制作 rootfs.img: |
− | 另外,你可以通过如下命令快速地将其烧写到SD卡中以进行测试:
| + | |
| <syntaxhighlight lang="bash"> | | <syntaxhighlight lang="bash"> |
− | $ ./tools/sd_update -d /dev/SD -p ./out/SD-bootable-1/your_company/partmap.txt
| + | git clone https://github.com/friendlyarm/sd-fuse_s5p4418.git |
| + | cd sd-fuse_s5p4418 |
| + | ./build-rootfs-img.sh /media/udisk/rootfs friendlycore |
| + | ./mk-emmc-image.sh friendlycore |
| </syntaxhighlight> | | </syntaxhighlight> |
− | 注意: 请将/dev/sdX替换为实际的SD卡设备节点。
| + | 现在,你可以将生成的 out/s5p4418-eflasher-friendlycore-xenial-4.4-YYYYMMDD.img 固件用于量产了。 |
− | --> | + | |
| | | |
− | <br>
| + | ==制作RK3399平台的系统映像== |
− | * <b>为H3 系列的板子制作基于Uboot-2011 + Linux-3.4 的sd ROM(例如FriendlyCore/Debian/OpenWrt...) </b>
| + | 请参考这个git仓库: https://github.com/friendlyarm/sd-fuse_rk3399 |
− | 无论是基于什么版本的BSP,做rom的原理都是一样的。这里以制作NanoPi M1的FriendlyCore sd ROM为例进行讲解,Debian、OpenWrt等sd ROM文件的制作方法是类似的。<br><br>
| + | |
− | 执行命令:
| + | |
− | <syntaxhighlight lang="bash">
| + | |
− | $ ./mkimage.sh -c 1 -m partmap/h3_linux-3.4/partmap.txt -d "misc/uboot-2011_m1/;part1/boot_linux-3.4_m1/;part2/m1/3.4/friendlycore/rootfs"
| + | |
− | </syntaxhighlight>
| + | |
− | 请将对应目录下的文件替换为你自己的定制文件。对于所有使用Linux-3.4 BSP的H3板子,使用的都是同一个partmap文件partmap/h3_linux-3.4/partmap.txt。<br>
| + | |
− | 以此类推,NanoPi M1 Plus 的做ROM 命令如下:
| + | |
− | <syntaxhighlight lang="bash">
| + | |
− | $ ./mkimage.sh -c 1 -m partmap/h3_linux-3.4/partmap.txt -d "misc/uboot-2011_m1-plus/;part1/boot_linux-3.4_m1-plus/;part2/m1-plus/3.4/friendlycore/rootfs"
| + | |
− | </syntaxhighlight>
| + | |
− | NanoPi NEO / NanoPi NEO Air也是同样的道理,这样不再赘述。
| + | |
| | | |
− | <br> | + | ==制作S5P4418平台的系统映像== |
− | * <b>为H3 系列的板子制作基于Uboot-2017 + Linux-4.14 的Eflasher ROM</b>
| + | 请参考这个git仓库: https://github.com/friendlyarm/sd-fuse_s5p4418<br /> |
− | 制作Eflasher ROM的前提条件是已经成功制作出了FriendlyCore系列的ROM,即已经有待烧写到eMMC的原材料文件,例如基于Uboot-2017 + Linux-4.14的FriendlyCore系统:
| + | <br /> |
| + | Example: <br /> |
| <syntaxhighlight lang="bash"> | | <syntaxhighlight lang="bash"> |
− | $ tree out/
| + | mkdir test |
− | out/
| + | cd test |
− | ├── SD-bootable-1
| + | git clone https://github.com/friendlyarm/sd-fuse_s5p4418 |
− | │ └── your_company
| + | cd sd-fuse_s5p4418/ |
− | │ ├── boot.img
| + | tar xzf /mnt/dvd/S5P4418/images-for-eflasher/friendlycore-images.tgz |
− | │ ├── info.conf
| + | tar xzf /mnt/dvd/S5P4418/images-for-eflasher/emmc-flasher-images.tgz |
− | │ ├── partmap.txt
| + | tar xzf /mnt/dvd/S5P4418/rootfs/rootfs-friendlycore-20190718.tgz |
− | │ ├── rootfs.img
| + | sed "s/\${BOARD}/XXYYZZ/g" friendlycore/rootfs/etc/rc.local -i |
− | │ └── u-boot-sunxi-with-spl.bin
| + | ./build-rootfs-img.sh friendlycore/rootfs friendlycore |
| + | ./mk-emmc-image.sh friendlycore |
| + | dd if=out/s5p4418-eflasher-friendlycore-20190730.img of=/dev/sdX bs=32M |
| </syntaxhighlight> | | </syntaxhighlight> |
| + | <br /> |
| + | 上例中两个关键的命令:<br /> |
| + | ./build-rootfs-img.sh friendlycore/rootfs friendlycore<br /> |
| + | 将 friendlycore/rootfs 目录制作成 rootfs.img <br /> |
| + | <br /> |
| + | ./mk-emmc-image.sh friendlycore<br /> |
| + | 将friendlycore目录下的系统制作为 eflaher固件,会生成 out/s5p4418-eflasher-friendlycore-20190730.img,直接 dd 到卡里即可<br /> |
| | | |
− | 假设你有一张已经烧写Eflasher系统的SD卡,请将SD卡插入PC机中,然后挂载SD卡的rootfs分区(假设挂载路径为/media/SD/rootfs-eflasher, 请注意使用真实路径),然后通过以下命令就可以生成Eflasher ROM:
| + | ==制作S5P6818平台的系统映像== |
− | <syntaxhighlight lang="bash">
| + | 请参考这个git仓库: https://github.com/friendlyarm/sd-fuse_s5p6818 |
− | $ ./mkimage.sh p2 partmap/h3_eflasher-4.14/partmap.txt misc/uboot-2017_h3/ part1/boot_linux-4.14_h3/ /media/SD/rootfs-eflasher out/SD-bootable-1/
| + | |
− | </syntaxhighlight>
| + | ==制作H3 平台的系统映像== |
− | mkimage.sh执行成功后,会生成一个out/SD-bootable-p2目录,其内容如下:
| + | 请参考这个git仓库: https://github.com/friendlyarm/sd-fuse_h3 |
− | <syntaxhighlight lang="bash">
| + | |
− | $ tree out/
| + | |
− | out/
| + | |
− | ├── SD-bootable-1
| + | |
− | │ └── your_company
| + | |
− | │ ├── boot.img
| + | |
− | │ ├── info.conf
| + | |
− | │ ├── partmap.txt
| + | |
− | │ ├── rootfs.img
| + | |
− | │ └── u-boot-sunxi-with-spl.bin
| + | |
− | ├── SD-bootable-1.img
| + | |
− | ├── SD-bootable-p2
| + | |
− | │ └── your_company
| + | |
− | │ ├── boot.img
| + | |
− | │ ├── friendlyarm.img
| + | |
− | │ ├── info.conf
| + | |
− | │ ├── partmap.txt
| + | |
− | │ ├── rootfs.img
| + | |
− | │ └── u-boot-sunxi-with-spl.bin
| + | |
− | └── SD-bootable-p2.img
| + | |
− | </syntaxhighlight>
| + | |
− | SD-bootable-p2.img为最终的Eflasher ROM文件,该Eflasher ROM能烧写什么系统到eMMC完全取决于out/SD-bootable-1/里包含了什么系统文件。
| + | |
− | <!--
| + | |
− | 通过如下命令迅速将其烧写到SD卡中以进行测试:
| + | |
− | <syntaxhighlight lang="bash">
| + | |
− | $ ./tools/sd_update -d /dev/SD -p ./out/SD-bootable-p2/your_company/partmap.txt
| + | |
− | </syntaxhighlight>
| + | |
− | 注意: 请将/dev/sdX替换为实际的SD卡设备节点。
| + | |
− | -->
| + | |
− | 你可以用win32diskimager或者dd命令将SD-bootable-p2.img烧写到SD卡中。
| + | |
| | | |
| ==制作H5 平台的系统映像== | | ==制作H5 平台的系统映像== |
− | 如果你定制了U-boot、Linux内核、文件系统,并且想基于自己定制的文件制作Linux系统映像文件 (以下简称为ROM文件),可以参考如下操作:<br>
| + | 请参考这个git仓库: https://github.com/friendlyarm/sd-fuse_h5 |
− | 下载压缩包rom-maker-lite.tar.gz: [https://pan.baidu.com/s/1DSd4XYXr1yGyQTdRNQNoOw 点击下载],然后在PC机 Ubuntu系统里解压得到如下目录:
| + | |
− | <syntaxhighlight lang="bash">
| + | |
− | $ rom-maker-lite
| + | |
− | </syntaxhighlight>
| + | |
− | rom-maker-lite里最重要的脚本工具为mkimage.sh,执行该脚本可以制作出各种从SD启动的ROM(例如FriendlyCore系统、EFlasher系统)。<br><br>
| + | |
− | | + | |
− | 目前rom-maker-lite支持为 H3/H5 系列的开发板制作Linux平台的ROM文件,执行./mkimage.sh可以查看帮助信息:
| + | |
− | <syntaxhighlight lang="bash">
| + | |
− | $ ./mkimage.sh
| + | |
− | Usage:
| + | |
− | $ apt-get install tree dosfstools
| + | |
− | $ ./mkimage.sh <prepare type> <partmap> <misc dir> <partition1 dir> <partition2 dir>
| + | |
− | prepare type:
| + | |
− | p1: prepare misc(bootloader) + partition1.img(fat32 boot) + partition2.img(ext4 rootfs)
| + | |
− | p2: prepare misc(bootloader) + partition1.img(fat32 boot) + partition2.img(ext4 rootfs) + partition3.img(fat32 eflashed material)
| + | |
− | p3: prepare misc(bootloader) + partition1.img(ext4 boot) + partition2.img(ext4 rootfs)
| + | |
− | </syntaxhighlight>
| + | |
− | | + | |
− | ::{| class="wikitable"
| + | |
− | |-
| + | |
− | |参数||说明
| + | |
− | |-
| + | |
− | |<prepare type> || 用于指定做ROM前的准备方式,对于H3/H5系列的开发板,p1表示FriendlyCore/Ubuntu/Debian系列的ROM,p2标志制作Eflasher系列的ROM。
| + | |
− | |-
| + | |
− | |<partmap> || 用于指定制作ROM时需要的partmap文件,partmap文件用于指定ROM Image的布局方式和组成文件,不同的板子或者是同一板子不同版本的BSP使用的partmap文件是不一样的。
| + | |
− | |-
| + | |
− | |<misc dir> || 对于H3/H5系列的开发板,用于指定bootloader所在的目录路径。
| + | |
− | |-
| + | |
− | |<partition1 dir> || 对于H3/H5系列的开发板,用于指定boot分区的目录路径。
| + | |
− | |-
| + | |
− | |<partition2 dir> || 对于H3/H5系列的开发板,用于指定rootfs分区的目录路径。
| + | |
− | |-
| + | |
− | |}
| + | |
− | | + | |
− | <br>
| + | |
− | * <b>为H5 系列的板子制作基于Uboot-2017 + Linux-4.14 的ROM</b>
| + | |
− | 所有H5 系列的板子是共用同一个基于Uboot-2017 + Linux-4.14 的ROM的,所以对于这个版本的BSP,所有H5 系列的板子的做ROM命令是一样的。假设你有一张已经烧写FriendlyCore系统的SD卡,该SD卡的rootfs目录下已经包含了你的产品应用程序,请将SD卡插入PC机中,然后挂载SD卡的rootfs分区(假设挂载路径为/media/SD/rootfs, 请注意使用真实路径),然后通过以下命令可以生成产品适用的ROM文件:
| + | |
− | <syntaxhighlight lang="bash">
| + | |
− | $ ./mkimage.sh p1 partmap/h5_linux-4.14/partmap.txt misc/uboot-2017_h5/ part1/boot_linux-4.14_h5/ /media/SD/rootfs
| + | |
− | </syntaxhighlight>
| + | |
− | 请将对应目录(misc/uboot-2017_h5、part1/boot_linux-4.14_h5)下的文件替换为你自己的定制文件,当然你也可以使用目录里预编译好的系统文件,我们会不定期更新预编译好的系统文件,通过tree命令可查看有哪些可替换的系统文件,例如:
| + | |
− | <syntaxhighlight lang="bash">
| + | |
− | $ tree misc/uboot-2017_h5/ part1/boot_linux-4.14_h5/
| + | |
− | misc/uboot-2017_h5/
| + | |
− | ├── sunxi-spl.bin
| + | |
− | └── u-boot.itb
| + | |
− | part1/boot_linux-4.14_h5/
| + | |
− | ├── boot.cmd
| + | |
− | ├── boot.scr
| + | |
− | ├── Image
| + | |
− | ├── overlays
| + | |
− | │ └── sun50i-h5-gpio-dvfs-overlay.dtb
| + | |
− | ├── rootfs.cpio.gz
| + | |
− | ├── sun50i-h5-nanopi-k1-plus.dtb
| + | |
− | ├── sun50i-h5-nanopi-neo2.dtb
| + | |
− | ├── sun50i-h5-nanopi-neo-core2.dtb
| + | |
− | └── sun50i-h5-nanopi-neo-plus2.dtb
| + | |
− | </syntaxhighlight>
| + | |
− | | + | |
− | 对于所有使用Linux-4.14 BSP的H5板子,使用的都是同一个partmap文件partmap/h5_linux-4.14/partmap.txt。<br>
| + | |
− | mkimage.sh执行成功后,会生成一个out/SD-bootable-1目录,其内容如下:
| + | |
− | <syntaxhighlight lang="bash">
| + | |
− | $ tree out/
| + | |
− | out/
| + | |
− | ├── SD-bootable-1
| + | |
− | │ └── your_company
| + | |
− | │ ├── boot.img
| + | |
− | │ ├── info.conf
| + | |
− | │ ├── partmap.txt
| + | |
− | │ ├── rootfs.img
| + | |
− | │ ├── sunxi-spl.bin
| + | |
− | │ └── u-boot.itb
| + | |
− | ├── SD-bootable-1.img
| + | |
− | | + | |
− | </syntaxhighlight>
| + | |
− | part1/boot_linux-4.14_h5/目录被制作成了boot.img,part2/rootfs_demo/被制作成了rootfs.img,而SD-bootable-1.img则为最终的ROM文件。
| + | |
− | <!--
| + | |
− | 你可以通过如下命令迅速将其烧写到SD卡中以进行测试:
| + | |
− | <syntaxhighlight lang="bash">
| + | |
− | $ ./tools/sd_update -d /dev/SD -p ./out/SD-bootable-1/your_company/partmap.txt
| + | |
− | </syntaxhighlight>
| + | |
− | 注意: 请将/dev/sdX替换为实际的SD卡设备节点。
| + | |
− | -->
| + | |
− | 你可以用win32diskimager或者dd命令将SD-bootable-p2.img烧写到SD卡中。
| + | |
− | | + | |
− | <br>
| + | |
− | * <b>为H5 系列的板子制作基于Uboot-2014 + Linux-3.10 的ROM </b>
| + | |
− | 以NanoPi NEO2为例,执行命令:
| + | |
− | <syntaxhighlight lang="bash">
| + | |
− | $ ./mkimage.sh p1 partmap/h5_linux-3.10/partmap.txt misc/uboot-2014_neo2/ part1/boot_linux-3.10_neo2/ part2/rootfs_demo/
| + | |
− | </syntaxhighlight>
| + | |
− | 请将对应目录下的文件替换为你自己的定制文件。<br>
| + | |
− | 对于所有使用Linux-3.10 BSP的H5板子,使用的都是同一个partmap文件partmap/h5_linux-3.10/partmap.txt。<br>
| + | |
− | | + | |
− | <br>
| + | |
− | * <b>为H5 系列的板子制作基于Uboot-2017 + Linux-4.14 的Eflasher ROM</b>
| + | |
− | 制作Eflasher ROM的前提条件是已经成功制作出了FriendlyCore系列的ROM,即已经有待烧写到eMMC的原材料文件,例如基于Uboot-2017 + Linux-4.14的FriendlyCore系统::
| + | |
− | <syntaxhighlight lang="bash">
| + | |
− | $ tree out/
| + | |
− | out/
| + | |
− | ├── SD-bootable-1
| + | |
− | │ └── your_company
| + | |
− | │ ├── boot.img
| + | |
− | │ ├── info.conf
| + | |
− | │ ├── partmap.txt
| + | |
− | │ ├── rootfs.img
| + | |
− | │ ├── sunxi-spl.bin
| + | |
− | │ └── u-boot.itb
| + | |
− | </syntaxhighlight>
| + | |
− | | + | |
− | 假设你有一张已经烧写Eflasher系统的SD卡,请将SD卡插入PC机中,然后挂载SD卡的rootfs分区(假设挂载路径为/media/SD/rootfs-eflasher, 请注意使用真实路径),然后通过以下命令就可以生成Eflasher ROM:
| + | |
− | <syntaxhighlight lang="bash">
| + | |
− | $ ./mkimage.sh p2 partmap/h5_eflasher-4.14/partmap.txt misc/uboot-2017_h5/ part1/boot_linux-4.14_h5/ /media/SD/rootfs-eflasher out/SD-bootable-1/
| + | |
− | </syntaxhighlight>
| + | |
− | mkimage.sh执行成功后,会生成一个out/SD-bootable-p2目录,其内容如下:
| + | |
− | <syntaxhighlight lang="bash">
| + | |
− | $ tree out/
| + | |
− | out/
| + | |
− | ├── SD-bootable-1
| + | |
− | │ └── your_company
| + | |
− | │ ├── boot.img
| + | |
− | │ ├── info.conf
| + | |
− | │ ├── partmap.txt
| + | |
− | │ ├── rootfs.img
| + | |
− | │ ├── sunxi-spl.bin
| + | |
− | │ └── u-boot.itb
| + | |
− | ├── SD-bootable-1.img
| + | |
− | ├── SD-bootable-p2
| + | |
− | │ └── your_company
| + | |
− | │ ├── boot.img
| + | |
− | │ ├── friendlyarm.img
| + | |
− | │ ├── info.conf
| + | |
− | │ ├── partmap.txt
| + | |
− | │ ├── rootfs.img
| + | |
− | │ ├── sunxi-spl.bin
| + | |
− | │ └── u-boot.itb
| + | |
− | └── SD-bootable-p2.img
| + | |
− | </syntaxhighlight>
| + | |
− | SD-bootable-p2.img为最终的Eflasher ROM文件,该Eflasher ROM能烧写什么系统到eMMC完全取决于out/SD-bootable-1/里包含了什么系统文件。
| + | |
− | <!--
| + | |
− | 通过如下命令迅速将其烧写到SD卡中以进行测试:
| + | |
− | <syntaxhighlight lang="bash">
| + | |
− | $ ./tools/sd_update -d /dev/SD -p ./out/SD-bootable-p2/your_company/partmap.txt
| + | |
− | </syntaxhighlight>
| + | |
− | 注意: 请将/dev/sdX替换为实际的SD卡设备节点。
| + | |
− | -->
| + | |
− | 你可以用win32diskimager或者dd命令将SD-bootable-p2.img烧写到SD卡中。
| + | |