Difference between revisions of "APITestPage"

From FriendlyELEC WiKi
Jump to: navigation, search
(updated by API)
(updated by API)
Line 1: Line 1:
−
[[NanoPC-T3/zh|查看中文]]
+
API comming, <br />
−
 
+
To see a world in a grain of sand,   <br />
−
==Introduction==
+
And a heaven in a wild fllower,   <br />
−
[[File:NanoPC-T3-01B.jpg|thumb|Overview]]
+
Hold infinity in the palm of your hand,  <br />
−
[[File:NanoPC-T3-A01.jpg|thumb|Front]]
+
And eternity in an hour. <br />
−
[[File:NanoPC-T3-B01.jpg|thumb|Back]]
+
{{APITestTemplate}}
−
* The NanoPC-T3 octa-core single board computer is designed and developed by FriendlyARM for professional and enterprise users. It uses the Samsung Octa-Core Cortex-A53 S5P6818 SoC. Compared to the FriendlyARM NanoPC-T2 the NanoPC-T3 not only has all the T2’s interfaces and ports but also has a more powerful SoC. Its dynamic frequency scales from 400M up to 1.4GHz. The NanoPC-T3 has 8G eMMC onboard, audio jack, video input/output interfaces, built-in WiFi, Bluetooth and Gbps Ethernet port. In addition the NanoPC-T3 has power management, on board porcelain antenna and serial debug port. To avoid overheat issues the NanoPC-T3 has a heat sink with mounting holes.
+
−
* The NanoPC-T3 has two camera interfaces: a DVP camera interface and a MIPI-CSI interface, and four video interfaces: HDMI 1.4A, LVDS, parallel RGB-LCD interface and MIPI-DSI interface. It supports RTC and has RTC interface pins. It has four USB ports with two being type A ports and two being 2.54mm pitch pin-headers.
+
−
* The NanoPC-T3 supports muitple OS systems e.g. Android5.1, Debian and UbuntoCore+Qt. It is an open source project with rich interfaces and ports. It is born a choice for professional and enterprise users.
+
−
 
+
−
==Hardware Spec==
+
−
* SoC: Samsung S5P6818 Octa-Core Cortex-A53, 400M Hz - 1.4G Hz
+
−
* Power Management Unit: AXP228 PMU, it supports software power-off and wake-up.
+
−
* System Memory: 1GB/2GB 32bit DDR3 RAM
+
−
* Storage: 1 x SD Card Socket
+
−
* Ethernet: Gbit Ethernet(RTL8211E)
+
−
* WiFi: 802.11b/g/n
+
−
* Bluetooth: 4.0 dual mode
+
−
* Antenna: Porcelain Antenna IPX Interface
+
−
* eMMC: 8GB
+
−
* Video Input: DVP Camera/MIPI-CSI (two camera interfaces)
+
−
* Video Output: HDMI Type-A / LVDS / Parallel RGB-LCD / MIPI-DSI (four video output interfaces)
+
−
* Audio: 3.5 mm audio jack / via HDMI
+
−
* Microphone: onboard Microphone
+
−
* USB Host: 4 x USB 2.0 Host, two type A ports and two 2.54 mm pitch pin-headers
+
−
* MicroUSB: 1 x MicroUSB 2.0 Client, Type A
+
−
* LCD Interface: 0.5mm pitch 45 pin FPC seat, full color RGB 8-8-8
+
−
* HDMI: 1.4A Type A, 1080P
+
−
* DVP Camera: 0.5mm pitch 24 pin FPC seat
+
−
* GPIO: 2.54 mm pitch 30 pin-header
+
−
* Serial Debug Port: 2.54mm pitch 4-pin-header
+
−
* User Key: K1 (power), Reset
+
−
* LED: 1 x power LED and 2 x GPIO LED
+
−
* Other Resources: CPU’s internal TMU
+
−
* RTC Battery: RTC Battery Seat
+
−
* Heat Sink: 1 x Heat Sink with mounting holes
+
−
* Power: DC 5V/2A
+
−
* PCB: Six Layer
+
−
* Dimension: 100 mm x 60 mm
+
−
* Working Temperature: -40℃ to 80℃
+
−
* OS/Software: uboot, Android and Debian
+
−
 
+
−
==Software Features==
+
−
===UbuntuCore===
+
−
<!---
+
−
* mainline kernel: Linux-4.11.2
+
−
* rpi-monitor: check system status and information
+
−
--->
+
−
* npi-config: system configuration utility for setting passwords, language, timezone, hostname, SSH and auto-login,and enabling/disabling i2c, spi, serial and PWM
+
−
<!---
+
−
* software utility: wiringNP to access GPIO pins
+
−
* software utility: RPi.GPIO_NP to access GPIO pins
+
−
--->
+
−
* networkmanager: manage network
+
−
* system log output from serial port
+
−
<!---
+
−
* nano editor
+
−
--->
+
−
* welcome window with basic system information and status
+
−
* auto-login with user account "pi" with access to npi-config
+
−
* UART2 enabled
+
−
* supports CAM500B
+
−
<!---
+
−
* sudoers include "fa"
+
−
* on first system boot file system will be automatically extended.
+
−
* supports file system auto check and repair on system boot.
+
−
* supports FriendlyElec's [http://wiki.friendlyarm.com/wiki/index.php/NanoHat_PCM5102A NanoHat-PCM5102A] 
+
−
* supports USB WiFi module: refer to [[#Connect USB WiFi to NEO]]
+
−
* supports audio recording and playing with 3.5mm audio jack
+
−
* supports USB Host and 100M Ethernet
+
−
* supports FriendlyElec BakeBit modules
+
−
* supports dynamic frequency scaling and voltage regulation
+
−
* relieves overheat compared to kernel Linux-3.4
+
−
* fixed MAC address
+
−
 
+
−
===Ubuntu OLED===
+
−
* mainline kernel: Linux-4.11.2
+
−
* supports FriendlyElec's OLED module
+
−
--->
+
−
 
+
−
===Debian===
+
−
* supports CAM500B
+
−
 
+
−
<!---
+
−
===Debian for NAS Dock===
+
−
* mainline kernel: Linux-4.11.2
+
−
* supports FriendlyElec's NAS Dock
+
−
* optimized OpenMediaVault configuration options
+
−
* allocated swap section
+
−
--->
+
−
===Android===
+
−
* supports setting up static IP
+
−
* supports accessing hardware with FriendlyElec's libfriendlyarm-hardware.so
+
−
* integrated iTest utility for testing hardware
+
−
 
+
−
==Diagram, Layout and Dimension==
+
−
===Layout===
+
−
[[File:NanoPC-T3-1512B-IF-01.png |thumb|600px|NanoPC-T3 Layout]]
+
−
 
+
−
* '''30Pin GPIO Pin Spec'''
+
−
::{| class="wikitable"
+
−
|-
+
−
|Pin# || Name          ||Pin#  || Name   
+
−
|-
+
−
|1    || SYS_3.3V  ||2    || DGND
+
−
|-
+
−
|3    || UART2_TX/GPIOD20      ||4    || UART2_RX/GPIOD16
+
−
|-
+
−
|5    || I2C0_SCL      ||6    || I2C0_SDA
+
−
|-
+
−
|7    || SPI0_MOSI/GPIOC31      ||8    || SPI0_MISO/GPIOD0
+
−
|-
+
−
|9    || SPI0_CLK/GPIOC29          ||10    || SPI0_CS/GPIOC30
+
−
|-
+
−
|11  || UART3_TX/GPIOD21      ||12    || UART3_RX/GPIOD17
+
−
|-
+
−
|13  || UART4_TX/GPIOB29      ||14    || UART4_RX/GPIOB28
+
−
|-
+
−
|15  || UART5_TX/GPIOB31      ||16    || UART5_RX/GPIOB30
+
−
|-
+
−
|17  || GPIOC4 ||18    || GPIOC7
+
−
|-
+
−
|19  || GPIOC8    ||20    || GPIOC24
+
−
|-
+
−
|21  || GPIOC28    ||22    || GPIOB26
+
−
|-
+
−
|23  || GPIOD1/PWM0    ||24    || GPIOD8/PPM
+
−
|-
+
−
|25  || GPIOC13/PWM1    ||26    || AliveGPIO3
+
−
|-
+
−
|27  || GPIOC14/PWM2    ||28    || AliveGPIO5
+
−
|-
+
−
|29  || VDD_5V      ||30    || DGND
+
−
|}
+
−
 
+
−
* '''20Pin LVDS Interface Pin Spec'''
+
−
::{| class="wikitable"
+
−
|-
+
−
|Pin# || Name          ||Pin#  || Name   
+
−
|-
+
−
|1    || SYS_3.3V  ||2    || SYS_3.3V
+
−
|-
+
−
|3    ||GPIOC16      ||4    || GPIOB18
+
−
|-
+
−
|5    || DGND      ||6    || DGND
+
−
|-
+
−
|7    || LVDS_D0-      ||8    || LVDS_D0+
+
−
|-
+
−
|9    || LVDS_D1-          ||10    || LVDS_D1+
+
−
|-
+
−
|11  || LVDS_D2-      ||12    || LVDS_D2+
+
−
|-
+
−
|13  || DGND        ||14    || DGND
+
−
|-
+
−
|15  || LVDS_CLK-      ||16    || LVDS_CLK+
+
−
|-
+
−
|17  || LVDS_D3- ||18    || LVDS_D3+
+
−
|-
+
−
|19  ||I2C2_SCL    ||20    || I2C2_SDA
+
−
|}
+
−
 
+
−
* '''DVP Camera Interface Pin Spec'''
+
−
::{| class="wikitable"
+
−
|-
+
−
|Pin# || Name     
+
−
|-
+
−
|1, 2 || SYS_3.3V
+
−
|-
+
−
|7,9,13,15,24 || DGND
+
−
|-
+
−
|3    || I2C0_SCL
+
−
|-
+
−
|4    || I2C0_SDA 
+
−
|-
+
−
|5    || GPIOB14
+
−
|-
+
−
|6    || GPIOB16
+
−
|-
+
−
|8,10  || NC
+
−
|-
+
−
|11  || VSYNC
+
−
|-
+
−
|12  || HREF
+
−
|-
+
−
|14  || PCLK
+
−
|-
+
−
|16-23 || Data bit7-0
+
−
|}
+
−
 
+
−
* '''RGB LCD Interface Pin Spec'''
+
−
::{| class="wikitable"
+
−
|-
+
−
|Pin# || Name  || Description 
+
−
|-
+
−
|1, 2 || VDD_5V || 5V Output, it can be used to power LCD modules
+
−
|-
+
−
|11，20，29, 37，38，39，40, 45|| DGND || Ground
+
−
|-
+
−
|3-10    || Blue LSB to MSB  || RGB blue
+
−
|-
+
−
|12-19  || Green LSB to MSB || RGB green
+
−
|-
+
−
|21-28  || Red LSB to MSB  || RGB red
+
−
|-
+
−
|30      || GPIOB25          || available for users
+
−
|-
+
−
|31      || GPIOC15          || occupied by FriendlyARM one wire technology to recognize LCD models and control backlight and implement resistive touch, not applicable for users
+
−
|-   
+
−
|32      || XnRSTOUT Form CPU || low when system is reset
+
−
|-
+
−
|33      || VDEN  || signal the external LCD that data is valid on the data bus
+
−
|-
+
−
|34      || VSYNC || vertical synchronization
+
−
|-
+
−
|35      || HSYNC || horizontal synchronization
+
−
|-
+
−
|36      || LCDCLK || LCD clock, Pixel frequency
+
−
|-
+
−
|41      || I2C2_SCL  || I2C2 clock signal, for capacitive touch data transmission
+
−
|-
+
−
|42      || I2C2_SDA  || I2C2 data signal, for capacitive touch data transmission
+
−
|-
+
−
|43      || GPIOC16 || interrupt pin for capacitive touch, used with I2C2
+
−
|-
+
−
|44      || NC  || Not connected
+
−
|}
+
−
 
+
−
* '''MIPI-DSI Interface Pin Spec'''
+
−
::{| class="wikitable"
+
−
|-
+
−
|Pin# || Name     
+
−
|-
+
−
|1, 2, 3 || VDD_5V
+
−
|-
+
−
|4|| DGND
+
−
|-
+
−
|5 || I2C2_SDA  
+
−
|-
+
−
|6  || I2C2_SCL
+
−
|-
+
−
|7  || DGND
+
−
|-
+
−
|8      || GPIOC0
+
−
|-
+
−
|9      || DGND
+
−
|-   
+
−
|10      || GPIOC1
+
−
|-
+
−
|11      || DGND
+
−
|-
+
−
|12      || GPIOA28
+
−
|-
+
−
|13      || nRESETOUT
+
−
|-
+
−
|14, 15      || DGND
+
−
|-
+
−
|16      || MIPIDSI_DN3
+
−
|-
+
−
|17      || MIPIDSI_DP3
+
−
|-
+
−
|18      || DGND
+
−
|-
+
−
|19      || MIPIDSI_DN2
+
−
|-
+
−
|20    || MIPIDSI_DP2
+
−
|-
+
−
|21    || DGND
+
−
|-
+
−
|22    || MIPIDSI_DN1
+
−
|-
+
−
|23 || MIPIDSI_DP1
+
−
|-
+
−
|24 || DGND
+
−
|-
+
−
|25 || MIPIDSI_DN0
+
−
|-
+
−
|26 || MIPIDSI_DP0
+
−
|-
+
−
|27 || DGND
+
−
|-
+
−
|28 || MIPIDSI_DNCLK
+
−
|-
+
−
|29 || MIPIDSI_DPCLK
+
−
|-
+
−
|30 || DGND
+
−
|}
+
−
 
+
−
* '''MIPI-CSI Interface Pin Spec'''
+
−
::{| class="wikitable"
+
−
|-
+
−
|Pin# || Name     
+
−
|-
+
−
|1, 2 || SYS_3.3V
+
−
|-
+
−
|3|| DGND
+
−
|-
+
−
|4 || I2C0_SDA 
+
−
|-
+
−
|5  || I2C0_SCL
+
−
|-
+
−
|6  || DGND
+
−
|-
+
−
|7      || SPI2_MOSI/GPIOC12
+
−
|-
+
−
|8      || SPI2_MISO/GPIOC11
+
−
|-   
+
−
|9      || SPI2_CS/GPIOC10
+
−
|-
+
−
|10      || SPI2_CLK/GPIOC9
+
−
|-
+
−
|11      || DGND
+
−
|-
+
−
|12      || GPIOB9
+
−
|-
+
−
|13      || GPIOC2
+
−
|-
+
−
|14, 15 || DGND
+
−
|-
+
−
|16      || MIPICSI_DN3
+
−
|-
+
−
|17      || MIPICSI_DP3
+
−
|-
+
−
|18      || DGND
+
−
|-
+
−
|19      || MIPICSI_DN2
+
−
|-
+
−
|20    || MIPICSI_DP2
+
−
|-
+
−
|21 || DGND
+
−
|-
+
−
|22 || MIPICSI_DN1
+
−
|-
+
−
|23 || MIPICSI_DP1
+
−
|-
+
−
|24 || DGND
+
−
|-
+
−
|25 || MIPICSI_DN0
+
−
|-
+
−
|26 || MIPICSI_DP0
+
−
|-
+
−
|27 || DGND
+
−
|-
+
−
|28 || MIPICSI_DNCLK
+
−
|-
+
−
|29 || MIPICSI_DPCLK
+
−
|-
+
−
|30 || DGND
+
−
|}
+
−
:'''Notes'''
+
−
::#SYS_3.3V: 3.3V power output
+
−
::#VDD_5V: 5V power output
+
−
::#For more details refer to the document: [http://wiki.friendlyarm.com/wiki/images/d/d5/NanoPC-T2-T3-1603-Schematic.pdf NanoPC-T3 Schematic]
+
−
 
+
−
===Board Dimension===
+
−
[[File:NanoPC-T2-T3-1603-Dimensions.png|frameless|800px|NanoPC-T3 Dimensions]]
+
−
 
+
−
::For more details refer to the document: [http://wiki.friendlyarm.com/wiki/images/2/24/NanoPC-T2-T3-1603-Dimensions%28dxf%29.zip NanoPC-T3-Dimensions(dxf)]
+
−
 
+
−
*'''Power Jack'''
+
−
::*DC 4.7~5.6V IN, 4.0*1.7mm Power Jack
+
−
::[[File:DC-023.png]]
+
−
 
+
−
==Notes in Hardware Design==
+
−
===EEPROM===
+
−
* The board has an EEPROM(model: 24AA025E48T-I/OT) with a unique MAC. This EEPROM is connected to I2C0 and its address is 0x51 therefore some EEPROM chips cannot be connected to I2C0 which will cause conflicts of addresses.
+
−
* In our tests these EEPROM chips cannot be connected to I2C0: 24C04, 24C08 and 24C16. There chips which we tested can be connected to I2C0: 24C01, 24C02 and 24C256
+
−
* For more details about EEPROM address issues refer to http://www.onsemi.com/pub_link/Collateral/CAT24C01-D.PDF
+
−
 
+
−
==Get Started==
+
−
===Essentials You Need===
+
−
Before starting to use your NanoPi-T3 get the following items ready
+
−
* NanoPi-T3
+
−
* SD Card: Class 10 or Above
+
−
* A DC 5V/2A power is a must
+
−
* HDMI monitor or LCD
+
−
* USB keyboard, mouse and possible a USB hub(or a TTL to serial board)
+
−
* A host computer running Ubuntu 16.04 64 bit system
+
−
{{S5P6818BootFromSDCard|NanoPC-T3}}
+
−
{{BurnOSToEMMC|NanoPC-T3|s5p6818-eflasher}}
+
−
{{S5PXX18MakeSDCardViaSDFusing|NanoPC-T3|sd-fuse_s5p6818}}
+
−
{{ResizeTFCardFS|NanoPC-T3}}
+
−
{{S5Pxx18HDMI|NanoPC-T3|arch/arm/plat-s5p6818/nanopi3/lcds.c}}
+
−
{{S5Pxx18MofidyKernelCommandLineOnHostPC|NanoPC-T3|sd-fuse_s5p6818}}
+
−
{{S5P6818Software|NanoPi-T3}}
+
−
{{S5P6818ChangeLog}}
+

Revision as of 03:28, 21 December 2017

API comming,
To see a world in a grain of sand,
And a heaven in a wild fllower,
Hold infinity in the palm of your hand,
And eternity in an hour.
Nice

Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=APITestPage&oldid=12677"